77
Using the SonicCell in Performance Mode
Selecting the item to edit (Effect Routing screen)
Parameter
Explanation
Part
(Part Output)
Edits the part settings.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the Part Edit screen
(p. 69).
F1–F3
(MFX1–MFX3)
Edits the multi-effect 1--3 settings.
Press [CURSOR/VALUE] to access the MFX1–3 screen (p. 78).
F1–F3
(MFX1–MFX3 Output)
Edits output-related settings for multi-effects 1–3.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the MFX1–3 Output
screen (p. 78).
C
(Chorus)
Edits the chorus settings.
Press [CURSOR/VALUE] to access the Chorus screen (p. 78).
C
(Chorus Output)
Edits output-related settings for chorus.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the Chorus Output
screen (p. 79).
R
(Reverb)
Edits the reverb settings.
Press [CURSOR/VALUE] to access the Reverb screen (p. 79).
R
(Reverb Output)
Edits output-related settings for reverb.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the Reverb Output
screen (p. 79).
M
(Mastering Effect)
Edits the mastering effect settings.
Press [CURSOR/VALUE] to access the Mastering Effect screen (p. 181).
STRCT
(MFX Structure)
Specifies how MFX 1–3 will be combined.
Press [CURSOR/VALUE] to access the MFX Structure screen (p. 80).
SRC
(Effect Source)
Selects how effects will operate.
Press [CURSOR/VALUE] to access the Effect Source screen (p. 80).
If you’ve set MFX3 Location (p. 149) to “Input FX” in the In/Out Routing (p. 144), you won't be able to use MFX3 as a
performance effect.
In this case, the MFX3 indication in the Effect Routing screen will be as follows.
* MFX3-related settings will be displayed in screens other than the Effect Routing screen, and you'll be able to edit the values,
but this will not affect the performance as long as MFX3 Location is set to Input FX.
SonicCell_e.book 77 ページ ２００７年８月９日 木曜日 午後９時１７分
To Next Page
Loading...
Need help?
General
