76
Using the SonicCell in Performance Mode
■
Procedure ....................................................................................................................
1.
From the MIDI INST screen or the Part View screen, press
[EFFECTS].
The [EFFECTS] indicator will light, and the Effect Routing
screen will appear.
fig.disp-PerformEfxSW01
2.
Turn [CURSOR/VALUE] to move the cursor to the
parameter that you want to edit.
3.
Press [CURSOR/VALUE].
4.
Turn [CURSOR/VALUE] to move the cursor to the
parameter that you want to edit.
5.
Press [CURSOR/VALUE] to highlight the value.
If there is a “SELECT” indicator for the value field, you can
press [CURSOR/VALUE] to move to the editing screen for
that parameter.
6.
Turn [CURSOR/VALUE] to edit the value, then press
[CURSOR/VALUE].
7.
When you’ve finished editing, press [EXIT].
The Part View screen will appear.
■
Menu screens during effect editing ................................................................................
From the Effect Routing screen, press [MENU] to
access the Menu screen.
The Menu screen is structured as shown in the
illustration at right. You can switch between screens by
turning [CURSOR/VALUE] to the right or left.
Press [MENU] once again to return to the Effect
Routing screen.
Parameter
Value Explanation
FX1–FX3
(MFX1–MFX3)
OFF, ON
Specifies whether MFX 1–3 will be used (ON) or not used (OFF).
CHO
(Chorus Switch)
OFF, ON
Specifies whether chorus will be used (ON) or not used (OFF).
REV
(Reverb Switch)
OFF, ON
Specifies whether Reverb will be used (ON) or not used (OFF).
MST
(Mastering Effect Switch)
OFF, ON
Specifies whether Mastering Effect will be used (ON) or not used (OFF).
CTRL1–CTRL3
(MFX1–3 Control)
Make settings for controlling the multi-effects via MIDI.
Press [CURSOR/VALUE] to access the MFX 1–3 Control screen (p. 81).
Write
(Performance Write)
Saves the current performance as user data.
Press [CURSOR/VALUE] to access the Performance Name screen (p. 73).
System
Press [CURSOR/VALUE] to access the System screen (p. 176).
Utility
Press [CURSOR/VALUE] to access the Utility screen (p. 182).
Demo Play
When you press [CURSOR/VALUE], the demo song list will appear.
* For details on how to play the demo songs, refer to p. 15 and p. 168.
SRX Info
(SRX Information)
Press [CURSOR/VALUE] to access the System SRX Info screen (p. 180).
Version
(Version Information)
Press [CURSOR/VALUE] to access the System Version Info screen (p. 180).
SonicCell_e.book 76 ページ ２００７年８月９日 木曜日 午後９時１７分
To Next Page
Loading...
Need help?
General
