Roland SonicCell User Manual

USER‘S GUIDE
22
Using the SonicCell as a MIDI Sound Module
■ Connections
fig.setsuzoku-MIDI.eps
■ Performance mode and Patch mode
When using the SonicCell as a MIDI sound module, either Performance mode or Patch mode can be
selected.
When the power is turned on, Performance mode is selected.
For details on Performance mode and Patch mode, refer to p. 54 .
■ Selecting a Performance
fig.button-MIDI-INST-Lite.epsfig.disp-MIDIINST.eps
Press [MIDI INST] so its indicator is lit.
The MIDI INST screen will appear.
fig.dispMIDIInst1.eps
Move the Cursor to the Performance Number.
Press [CURSOR/VALUE].
The value at the cursor will be highlighted.
For details on using [CURSOR/VALUE], refer to p. 20 .
fig.dispMIDIPrfmNum2.eps
Turn [CURSOR/VALUE] to change the performance number.
The sound will change.
Press [CURSOR/VALUE].
MIDI Keyboard
MIDI IN
OUTPUT
MIDI OUT
Monitor Amplifier etc.
NOTE
To prevent malfunction and/or damage to speakers or other devices, always turn down the vol-
ume, and turn off the power on all devices before making any connections.
When connection cables with resistors are used, the volume level of equipment connected to the
inputs (INPUT) may be low. If this happens, use connection cables that do not contain resistors.
Playing the
SonicCell in Performance Mode
1
Performance Number
2
13
14
15
SonicCell_e.book 22 ページ ２００７年８月９日 木曜日 午後９時１７分

Roland SonicCell Specifications

General

Brand	Roland
Model	SonicCell
Category	Computer Hardware
Language	English