Roland SonicCell User Manual

101
Using the SonicCell in Patch Mode
■ Patch Pitch Env screen...................................................................................................
Parameter
Value Explanation
P-Env Depth
(Pitch Envelope Depth)
-12–+12
Adjusts the effect of the Pitch Envelope. Higher settings will cause the pitch
envelope to produce greater change. Negative (-) settings will invert the
shape of the envelope.
P-Env V-Sens
(Pitch Envelope Velocity Sensi-
tivity)
-63–+63
Keyboard playing dynamics can be used to control the depth of the pitch
envelope. If you want the pitch envelope to have more effect for strongly
played notes, set this parameter to a positive (+) value. If you want the pitch
envelope to have less effect for strongly played notes, set this to a negative
(-) value.
P-Env T1 V-Sens
(Pitch Envelope Time 1 Velocity
Sensitivity)
-63–+63
This allows keyboard dynamics to affect the Time 1 of the Pitch envelope. If
you want Time 1 to be speeded up for strongly played notes, set this param-
eter to a positive (+) value. If you want it to be slowed down, set this to a
negative (-) value.
P-Env T4 V-Sens
(Pitch Envelope Time 4 Velocity
Sensitivity)
-63–+63
Use this parameter when you want key release speed to affect the Time 4
value of the pitch envelope. If you want Time 4 to be speeded up for quickly
released notes, set this parameter to a positive (+) value. If you want it to be
slowed down, set this to a negative (-) value.
P-Env Time KF
(Pitch Envelope Time Keyfollow)
-100–+100
Use this setting if you want the pitch envelope times (Time 2–Time 4) to be
affected by the keyboard location. Based on the pitch envelope times for the
C4 key, positive (+) settings will cause notes higher than C4 to have increas-
ingly shorter times, and negative (-) settings will cause them to have increas-
ingly longer times. Larger settings will produce greater change.
P-Env Time 1–4 ★
(Pitch Envelope Time 1–4)
0–127
Specify the pitch envelope times (Time 1–Time 4). Higher settings will result
in a longer time until the next pitch is reached. (For example, Time 2 is the
time over which the pitch changes from Level 1 to Level 2.)
★ You can use matrix control to modify this. (p. 95)
C4C3C2C1 C5 C6 C7
0
+50
+100
-50
-100
Key
Time
T1 T2 T3 T4
L3
L4
L2
L1
L0
Note off
Pitch
Time
Note on
T: Time L: Level
SonicCell_e.book 101 ページ ２００７年８月９日 木曜日 午後９時１７分

Roland SonicCell Specifications

General

Brand	Roland
Model	SonicCell
Category	Computer Hardware
Language	English