Roland SonicCell User Manual

89
Using the SonicCell in Patch Mode
■ Patch Edit screen ..........................................................................................................
The Patch Edit screen is organized as follows.
You can turn [CURSOR/VALUE] to the right or left to switch between screens.
* If the Str Type (p. 93) is set to any value other than 1, two screens will be shown for WG–OUT.
Parameter
Value Explanation
GENERAL
Edits overall settings for the entire patch.
Press [CURSOR/VALUE] to access the Patch General screen (p. 90).
STRUCTURE
Selects the combination of tones.
Press [CURSOR/VALUE] to access the Patch Structure screen (p. 93).
MATRIX CTRL (Control)
1/2/3/4
Specifies matrix control settings.
Press [CURSOR/VALUE] to access the Patch Mtrx Ctrl 1/2/3/4 screen (p. 95).
Tone 1&2, 3&4
Selects either 1 & 2 or 3 & 4 as the combination of tones that will be shown in the
screen.
WG
Edits waveform-related settings.
Press [CURSOR/VALUE] to access the Patch WG screen (p. 98).
WG
(Pitch Envelope)
Edits pitch envelope settings.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the
Patch Pitch Env screen (p. 101).
TVF
Edits TVF settings.
Press [CURSOR/VALUE] to access the Patch TVF screen (p. 102).
TVF
(TVF Envelope)
Edits TVF envelope settings.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the
Patch TVF Env screen (p. 104).
TVA
Edits TVA settings.
Press [CURSOR/VALUE] to access the Patch TVA screen (p. 105).
TVA
(TVA Envelope)
Edits TVA envelope settings.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the
Patch TVA Env screen (p. 107).
OUT
(Output)
Edits settings for the patch/tone output.
Press [CURSOR/VALUE] to access the Patch Output screen (p. 108).
LFO 1/2
Edits LFO1,2 settings.
Press [CURSOR/VALUE] to access the Patch LFO 1/2 screen (p. 109).
LFOS
(Step LFO)
Edits step LFO settings.
Press [CURSOR/VALUE] to access the Patch Step LFO screen (p. 112).
TMT
(Tone Mix Table)
Specifies how the tones will be heard.
Press [CURSOR/VALUE] to access the Patch TMT screen (p. 112).
CTRL
(Control)
Edits controller-related settings.
Press [CURSOR/VALUE] to access the Patch Ctrl screen (p. 114).
SonicCell_e.book 89 ページ ２００７年８月９日 木曜日 午後９時１７分

Roland SonicCell Specifications

General

Brand	Roland
Model	SonicCell
Category	Computer Hardware
Language	English