Roland SonicCell - Connecting a MIC; Connecting a Guitar

Recording a Mic or Guitar (USB/Audio Interface)
41
■ USER’S GUIDE
fig.setsuzoku-input-Mic.eps
Settings Required
INPUT SOURCE switch
➝ Set to “MIC”
When connecting a condenser mic that requires
phantom power
➝ Turn phantom power on (p. 142 )
fig.setsuzoku-input-guitar.eps
Settings Required
INPUT SOURCE switch
When sending your guitar through an effects
unit before connecting it to the SonicCell
➝ Set to “LINE”
When connecting your guitar directly to the
SonicCell without passing through an effects
unit
➝ Set to “GUITAR”
If you want to apply an effect
➝ Refer to p. 144
Connecting a Mic
L/GUITAR/MIC
Dynamic Mic
Acoustic Guitar etc.
Condenser
Mic
Input Source
Switch
Connecting a Guitar
L/GUITAR/MIC
Guitar
Input Source
Switch
SonicCell_e.book 41 ページ ２００７年８月９日 木曜日 午後９時１７分