86
Using the SonicCell in Patch Mode
You can choose the patch from a list that’s arranged by group, such as USER or expansion board.
* When the power is turned on, the Patch List (Ctg) screen is selected.
1.
Display the Patch Play screen.
2.
Select “LIST” and press [CURSOR/VALUE].
The Patch List (Ctg) screen will appear.
* If the Patch List (Grp) was displayed last, the Patch List
(Grp) screen will appear. Proceed to step 5.
3.
Press [MENU] to access the Category Select screen.
4.
Choose “GROUP LIST” and press [CURSOR/VALUE].
The Patch List (Grp) screen will appear.
fig.disp-PatchL-Grp
5.
Turn [CURSOR/VALUE] to select a patch, and press
[CURSOR/VALUE].
The patch will change, and you’ll be returned to the Patch
Play screen.
■
Menu screen.................................................................................................................
From the Patch List (Grp) screen, press [MENU] to access the Group Select screen.
Press [MENU] once again to return to the Patch List (Grp) screen.
Selecting patches from a patch list by group (Patch List (Grp) screen)
Parameter
Explanation
USR, A–G, GM, EXA, EXB
Changes the group and returns to the patch list by group screen.
USR:
User
A–G:
Preset A–Preset G
GM:
General MIDI
EXA, EXB:
Wave Expansion Board A, Wave Expansion Board B
* It is not possible to choose EXA, EXB unless a wave expansion board is inserted in to the corre-
sponding slot.
CATEG (Category) LIST
Press [CURSOR/VALUE] to access the Patch List (Ctg) screen (p. 85).
* Once you move to the Patch List (Ctg) screen, the Patch List (Ctg) screen will appear when you
select “LIST” in the Patch Play screen.
SonicCell_e.book 86 ページ ２００７年８月９日 木曜日 午後９時１７分
To Next Page
Loading...
Need help?
General
