Roland SonicCell User Manual

126
Using the SonicCell in Patch Mode
■ Rhythm TVF Env screen .................................................................................................
Parameter
Value Explanation
F-Env Depth
(TVF Envelope Depth)
-63–+63
Specifies the depth of the TVF envelope. Higher settings will cause the TVF
envelope to produce greater change. Negative (-) settings will invert the
shape of the envelope.
F-Env V-Curve
(TVF Envelope Velocity Curve)
FIX, 1–7
Selects one of the following 7 curves that will determine how keyboard play-
ing dynamics will affect the TVF envelope. Set this to “FIX” if you don’t want
the TVF Envelope to be affected by the keyboard velocity.
F-Env V-Sens
(TVF Envelope Velocity Sensi-
tivity)
-63–+63
Specifies how keyboard playing dynamics will affect the depth of the TVF
envelope. Positive (+) settings will cause the TVF envelope to have a greater
effect for strongly played notes, and negative (-) settings will cause the effect
to be less.
F-Env T1 V-Sens
(TVF Envelope Time 1 Velocity
Sensitivity)
-63–+63
This allows keyboard dynamics to affect the Time 1 of the TVF envelope. If
you want Time 1 to be speeded up for strongly played notes, set this param-
eter to a positive (+) value. If you want it to be slowed down, set this to a
negative (-) value.
F-Env T4 V-Sens
(TVF Envelope Time 4 Velocity
Sensitivity)
-63–+63
The parameter to use when you want key release speed to control the Time
4 value of the TVF envelope. If you want Time 4 to be speeded up for quickly
released notes, set this parameter to a positive (+) value. If you want it to be
slowed down, set this to a negative (-) value.
F-Env Time1–4
(TVF Envelope Time 1–4)
0–127
Specify the TVF envelope times (Time 1–Time 4). Higher settings will length-
en the time until the next cutoff frequency level is reached. (For example,
Time 2 is the time over which Level 1 will change to Level 2.)
F-Env Level0–4
(TVF Envelope Level 0–4)
0–127
Specify the TVF envelope levels (Level 0–Level 4). These settings specify how
the cutoff frequency will change at each point, relative to the standard cutoff
frequency (the cutoff frequency value specified in the TVF screen).
1234567
T1 T2 T3 T4
L3
L1
L0
L2 L4
Note off
Cutoff
Frequency
Time
Note on
T: Time L: Level
SonicCell_e.book 126 ページ ２００７年８月９日 木曜日 午後９時１７分

Roland SonicCell Specifications

General

Brand	Roland
Model	SonicCell
Category	Computer Hardware
Language	English