Roland SonicCell - Using the Soniccell in Performance Mode; Viewing the MIDI INST (MIDI Sound Module) Screen

58
Using the SonicCell in Performance Mode
1. Press [MIDI INST] so its indicator is lit.
The MIDI INST screen will appear.
fig.disp-MIDI-top01
* If Sound Mode (p. 60) is set to “Patch,” the Patch Play
screen (p. 82) will appear.
In this case, simultaneously press [MIDI INST] and [PART
VIEW] to switch to the MIDI INST screen of Performance
mode.
2. Turn [CURSOR/VALUE] to move the cursor to the
parameter you want to edit.
3. Press [CURSOR/VALUE] to highlight the value.
fig.disp-MIDI-top02
4. Turn [CURSOR/VALUE] to edit the value.
5. When you’ve finished editing, press [CURSOR/VALUE].
Viewing the MIDI INST (MIDI sound module) screen
(
1
)(
2
)
(
3
)
Parameter
Value Explanation
(1) Performance group
USER, PRST
Selects the performance group.
USER: User
PRST: Preset
(2)
Performance
number/name
01–64
Selects the performance.
The SonicCell’s sixty-four preset performances have been created to be
appropriate for the following uses.
PRST01–33 For song production
PRST34–64 For playing
(3)
Settings for each
part
-, M, S, *
For each part, you can specify whether sound will be heard.
-: Sound can be heard.
M (mute): The sound will be temporarily muted (silenced).
S (solo): Selects the one part that will be heard. Parts other than the one set to
“S” will be muted.
*: In the SonicCell Editor you can set mute and solo separately. In this
case, “*” is shown for parts for which both mute and solo have been
specified.
SonicCell_e.book 58 ページ ２００７年８月９日 木曜日 午後９時１７分