Basic Operation of the SonicCell
21
■ USER’S GUIDE
Editing a Value
fig.dispCursorValue1
Let’s try changing the patch number.
Turn [CURSOR/VALUE] to move the cursor
to the patch number.
fig.cursor-push-eps
Press [CURSOR/VALUE].
fig.dispCursorValue2
fig.cursor-turn.eps
The patch number will be highlighted.
Turn [CURSOR/VALUE].
fig.dispCursorValue3
The value will change.
When you edit the value, an “E” symbol may
appear in the upper right of the screen.
In this case, you can save the settings you’ve
edited.
Saving perfoemances
➝
Refer to “Performance Write (p. 73 ).”
fig.disp-cursorValue4.eps
Press [CURSOR/VALUE] once more.
The cursor will return to its original state.
Cursor
Patch Number
1
Press
2
The value at the
cursor is
highlighted
Turn
3
The value
will change
Shown when you
edit the value
1
4
SonicCell_e.book 21 ページ ２００７年８月９日 木曜日 午後９時１７分
To Next Page
Loading...
Need help?
General
