Roland SonicCell - Page 26

USER‘S GUIDE
26
■ Editing the Filter
By editing the filter settings you can make the tonal character of the sound brighter or darker.
fig.dispPtchPly-Edithanten.eps
In the Patch Play screen, turn [CURSOR/VALUE] to move the cur-
sor to the “EDIT.”
Press [CURSOR/VALUE].
The Patch Edit screen will appear.
fig.dispPtchEdtTVF.eps
Turn [CURSOR/VALUE] to move the cursor to the “TVF.”
Press [CURSOR/VALUE].
The Patch TVF screen will appear.
fig.disp-PatchTVF1.eps
Turn [CURSOR/VALUE] to move the cursor the “Cutoff Fre-
quency.”
Press [CURSOR/VALUE].
The value will be highlighted.
fig.disp-PatchTVF-Cutoff.eps
Turn the [CURSOR/VALUE] to edit the value, and then press
[CURSOR/VALUE].
When you change the value, the graph in the lower part of the
screen will also change.
If you press [EXIT] you’ll return to the preceding screen.
For details on filter, refer to p. 102 .
If you want to save the patch you modified, refer to p. 116 .
■ Changing the Effect
Effects are various types of processing that you can apply to the sound. You can dramatically vary the char-
acter of the sound simply by changing the effect.
fig.button-EFFECTS.epsfig.disp-EfxRouting.eps
In the Patch Play screen, press [EFFECTS].
The Effect Routing screen will appear.
fig.dispEfxRtF1.eps
Turn [CURSOR/VALUE] to move the cursor “MFX.”
fig.dispMFX.eps
1
2
3
4
5
6
7
MEMO
1
2
SonicCell_e.book 26 ページ ２００７年８月９日 木曜日 午後９時１７分