S-COM 7K - Page 335

Programming Tables
A-35
Command Quick Reference
Page Command Name Form and Data Digit Default User
5-4 Assign Control Operator Privilege Level (PW) 94 (root number, x) *
0 = master and control operator
1 = master only
all
commands
accessible
5-5 Assign Control Operator Privilege Level to
a Range of Commands
(PW) 94 (first root number, last root
number, x) *
0 = master and control operator
1 = master only
all
commands
accessible
5-6 Enable/Disable Front Panel Display (PW) 63 99 x *
0 = OFF (disabled)
1 = ON (enabled)
ON
enabled
6-1
Macros
6-5 Create New Macro (PW) 20 (macro name, command) * no macros
6-7 Append to Macro (PW) 29 (macro name, command) * none
6-9 List Macro in CW (PW) 33 (macro name) * none
6-9 List Macro in Speech (PW) 35 (macro name) * none
6-11 Erase Macro (PW) 21 (macro name) * none
6-12 Erase All Macros (PW) 22 00 * none
6-13 Rename Macro (PW) 27 (old, new) * none
6-15 Pause (PW) 98 xxx *
(1-255) seconds
none
6-16 Select Power ON-Triggered Macro (PW) 26 00 (macro name) * none
7-3
Autopatch Setup and Configuration
7-6 Select Autopatch Dialing Mode (PW) 61 x *
1 = 10 PPS rotary
2 = 20 PPS rotary
3 = 5 PPS DTMF
10 PPS
rotary
7-7 Select Autopatch Dialing Message (PW) 31 40 (message) * AS in CW
7-7 Review Autopatch Dialing Message (PW) 34 40 * AS in CW
7-8 Select Landline Busy Message (PW) 31 42 (message) * BZ in CW
7-8 Select Autopatch Off Message (PW) 31 44 (message) * OFF in CW
7-8 Select Autopatch Error Message
(Invalid phone number)
(PW) 31 45 (message) * ?ERR
in CW
7-8 Select Autopatch Reject Message
(Match in Reject Table)
(PW) 31 46 (message) * ?REJ
in CW
7-8 Select Autopatch No-Redial-Number
Message
(PW) 31 47 (message) * CLR in CW
7-8 Review Autopatch Error Message (PW) 34 45 * ?ERR
in CW
7-8 Review Autopatch No-Redial-Number
Message
(PW) 34 47 * CLR in CW
7-8 Review Autopatch Off Message (PW) 34 44 * OFF in CW
7-8 Review Autopatch Reject Message (PW) 34 46 * ?REJ
in CW
7-8 Review Landline Busy Message (PW) 34 42 * BZ in CW
7-9 Select Autopatch Dump Message (PW) 31 43 (message) * none