SCM CU 300C - Page 252

9a - OPERATIONS AND ADJUSTMENTS OF SPINDLE
EN
Pag. 42/45 - Cap. 9a THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
TRACER RESTS - HEIGHT ADJUSTMENT
- loosen the knob (C fig. 9.55-2C) or the screws (B fig. 9.55-2C) and adjust the rest (D fig. 9.55-2C) to the
desired height;
- relock when adjustment has been completed.
Fig. 9.55-2C