20 - MAINTENANCE
EN
Pag. 12/44 - Cap. 20 THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
Helicoidal planer with tips
DESCRIPTION INSPECTION INTERVALS OPERATIONS
Tools (U fig. 20.2) of the
planer unit
Visual inspection Daily
- By using an aspirator
remove dust or chips (Par.
20.1).
- Clean with a cloth or
brush soaked in a suitable
product which is not
dangerous.
- Rotate or replace tip-
tools, if need be (see Par.
7A.5).
To Next Page
Loading...
