SCM CU 300C - Page 45

EN
3 - TECHNICAL SPECIFICATIONS
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN Cap. 3 Pag. 3/22
MOULDER
DIMENSIONS OF WORKPIECE TO BE MILLED
Thickness Min. piece size in case of profiling operation 8 mm
Width Min. piece size in case of profiling operation 8 mm
Length Min. piece size in case of profiling operation 400 mm
Thickness Max. piece size in case of profiling operation 115 mm
Width Max. piece size in case of profiling operation 120 mm
Length Max. piece size in case of profiling operation
1000 (∗)
mm
(∗) In case of longer pieces use rest tables
Thickness Min. size of solid wood piece in case of tenoning 20 mm
Width Min. size of solid wood piece in case of tenoning 20 mm
Length Min. size of solid wood piece in case of tenoning 220 mm
Thickness Max. size of solid wood piece in case of tenoning 100 mm
Width Max. size of solid wood piece in case of tenoning 140 mm
Length Max. size of solid wood piece in case of tenoning 900 mm
Max. slot depth 100 mm