EN
3 - TECHNICAL SPECIFICATIONS
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN Cap. 3 Pag. 5/22
THICKNESSING PLANER
Max. thickness 230 mm
Max. length
DANGER-WARNING: may be not defined; we recommend
to use table extensions (not supplied by SCM) at entry
and exit side in case of panels longer than 2000 mm.
300 mm
CU 300C
Max. width
410 mm
CU 410C
Min. thickness 3,0 mm
Min. length 120 mm
DANGER-WARNING: never machine shorter workpieces.
Min. width 10 mm
DANGER-WARNING: never machine shorter workpieces.
To Next Page
Loading...
