SCM CU 300C - Page 56

3 - TECHNICAL SPECIFICATIONS
EN
Pag. 14/22 - Cap. 3 THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
MOULDER
Operating conditions – Profiling (according to norm 848-1:2007+ A1:2009)
Profiling
Measured size description
Reference
norm
Uncertainity
K
VSA LAV
Operator station
Lop: sound pressure
level at operator
station dB(A) and
peak level [dB(C)]
INPUT
EN ISO
11202:2010
4 dB 84
89
[99]
Lw: sound power level dB(A)
EN ISO
3744:2010
2 dB 89 94
The maximum istantaneus noise level pressure is under 130 dB (C).
VSA : Idle working without suction LAV : In operation
Operating conditions – Tenoning (according to norm 1218-1:1999+ A1:2009)
Tenoning
Measured size description
Reference
norm
Uncertainity
K
VSA LAV
Operator station
Lop: sound pressure
level at operator
station dB (A) and
peak level [dB(C)]
INPUT
EN ISO
11202:2010
4 dB 77
89
[98]
Lw: sound power level dB (A)
EN ISO
3744:2010
2 dB 85 98
The maximum istantaneus noise level pressure is under 130 dB (C).
VSA : Idle working without suction LAV : In operation