EN
3 - TECHNICAL SPECIFICATIONS
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN Cap. 3 Pag. 15/22
SURFACE PLANING MACHINE / THICKNESSING MACHINE
Cutterblock with knives
Surface planning
(
according to norm EN 859:2007+ A1:2009)*
Operating conditions
Thicknessing machine
(
according to norm EN 860:2007+ A1:2009)*
Measured size description
Reference
norm
Uncertainity
K
Surface planning
Thicknessing
machine
Operator
station
VSA LAV VSA
LAV
INPUT 81
93
[117]
78
94
[111]
Lop: sound
pressure level
at operator
station dB (A)
and peak level
[dB(C)]
OUTPUT
EN ISO
11202:2010
4 dB
74
87
[106]
Lw: sound power level
dB (A)
re 1pW
EN ISO
3744:2010
2 dB 88 102 87 102
The maximum istantaneus noise level pressure is under 130 dB (C).
VSA: Idle working without suction LAV: In operation
* Refer to the test document N° 2015030 to analyse the actual operating conditions used to make the test,
different from those operating conditions prescribed by the norm mentioned above.
To Next Page
Loading...
