3 - TECHNICAL SPECIFICATIONS
EN
Pag. 22/22 - Cap. 3 THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
CAUTION:
the measures above indicated are to be considered as the free room of the working area.
DANGER-WARNING:
this machine has been designed to be used by one operator.
= Surfacing planer.......................................... = Thicknessing planer
= Drilling .......................................................... = Parallel cutting
= Moulder machining ..................................... = Slide machining
Lp max = Max. workpiece length
To Next Page
Loading...
