Name: Siemens SIMATIC S7-300 Module data
Brand: Siemens
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Analog Modules

4-138

Programmable Logic Controllers S7-300 Module Data

A5E00105505-03

4.24 Analog Input Module SM 331; AI 8 x TC

(6ES7331-7PF10-0AB0)

Order number

6ES7331-7PF10-0AB0

Characteristics

The analog input module SM 331; AI 8 x TC has the following features:

• 8 differential inputs for thermocouples (TC) in 4 channel groups

• Optional setting of the thermocouple type per channel group

• Rapid measured value updating for up to 4 channels

• Measured-value resolution 15 bits + sign (independent of integration time)

• Programmable diagnostics

• Programmable diagnostic interrupt

• 8 channels with limit monitoring

• Programmable hardware interrupt when limit has been exceeded

• Programmable end-of-scan-cycle interrupt

• Programmable reaction to open thermocouple

• Isolated against the backplane bus interface

Use of the module in the distributed peripheral ET 200M

When you use the SM 331; AI 8 x TC in the distributed peripheral ET 200M, you

must have one of the following IM 153-x:

• IM 153-1; as of 6ES7153-1AA03-0XB0, E 01

• IM 153-2; as of 6ES7153-2AA02-0XB0, E 05

• IM 153-2; as of 6ES7153-2AB01-0XB0, E 04

Other manuals for Siemens SIMATIC S7-300 Module data

Questions and Answers:

Need help?

Do you have a question about the Siemens SIMATIC S7-300 Module data and is the answer not in the manual?

General