Siemens SIMATIC S7-300 Module data - Analog Value Representation; Setting the Measuring Method and Measuring Ranges of Analog Input Channels; Analog Module Parameter Assignment; Connecting Voltage Sensors

Analog Modules
4-2
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
In this chapter
Section Contents Page
4.1 Module Overview 4-3
4.2 Sequence of Steps from Choosing to Commissioning
the Analog Module
4-8
4.3 Analog Value Representation 4-9
4.4 Setting the Measuring Method and Measuring Ranges of Analog
Input Channels
4-28
4.5 Behavior of Analog Modules 4-31
4.6 Conversion, Cycle, Setting and Response Time of Analog
Modules
4-35
4.7 Analog Module Parameter Assignment 4-39
4.8 Connecting Sensors to Analog Inputs 4-45
4.9 Connecting Voltage Sensors 4-50
4.10 Connecting Current Sensors 4-51
4.11 Connecting Resistance Thermometers and Resistors 4-53
4.12 Connecting Thermocouples 4-58
4.13 Connecting Loads/Actuators to Analog Outputs 4-66
4.14 Connecting Loads/Actuators to Voltage Outputs 4-67
4.15 Connecting Loads/Actuators to Current Outputs 4-70
4.16 Diagnostics of the Analog Modules 4-71
4.17 Interrupts of the Analog Modules 4-75
4.18 Analog Input Module SM 331; AI 8 x 16 bits;
(6ES7331-7NF00-0AB0)
4-77
4.19 Analog Input Module SM 331; AI 8 x 16 bits
(6ES7331-7NF10-0AB0)
4-86
4.20 Analog Input Module SM 331; AI 8 x 14 bits High Speed;
(6ES7331-7HF0x-0AB0)
4-97
4.21 Analog Input Module SM 331; AI 8 x 13 bits;
(6ES7331-1KF01-0AB0)
4-108
4.22 Analog Input Module SM 331; AI 8 x 12 bits;
(6ES7331-7KF02-0AB0)
4-115
4.23 Analog Input Module SM 331; AI 8 x RTD
(6ES7331-7PF00-0AB0)
4-125
4.24 Analog Input Module SM 331; AI 8 x TC (6ES7331-7PF10-0AB0) 4-138
4.25 Analog Input Module SM 331; AI 2 x 12 bits;
(6ES7331-7KB02-0AB0)
4-153
4.26 Analog Output Module SM 332; AO 8 x 12 bits
(6ES7332-5HF00-0AB0)
4-163
4.27 Analog Output Module SM 332; AO 4 x 16 bits, synchronous;
(6ES7332-7ND01-0AB0)
4-169
4.28 Analog Output Module SM 332; AO 4 x 12 bits;
(6ES7332-5HD01-0AB0)
4-176