Siemens SIMATIC S7-300 Module data - 5 Special Signal Modules

Index
Index-5
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
IM 365
dimension drawing, C-14
Interface Module , 6-7
Input delay, Glossary-4
SM 321; DI 16 x 24 VDC, 3-27
Insulation test, 1-12
Integration time, Glossary-5
analog input/output module, 4-44
Interface module, 6-1
dimension drawing, C-13
IM 360, 6-3
IM 361, 6-5
Interface Module , IM 365, 6-7
Interference
pulse-shaped, 1-6
sinusoidal, 1-7
Interference frequency suppression,
Glossary-5
analog input module, 4-42, A-9
SM 331; AI 8 x 13 bits, A-28
SM 331; AI 8 x RTD, A-16
SM 331; AI 8 x TC, A-24
Internal auxiliary voltage missing, SM 321;
DI 16 x 24 VDC, 3-31
Internal compensation, Temperature error,
Glossary-10
Internal error, SM 338; POS-INPUT, 5-19
Interrupt, Glossary-5
Interrupt-triggering channels, SM 321;
DI 16 x 24 VDC, 3-33
Interrupts
enabling, 3-32, 3-80, 4-75, 5-20
of analog modules, 4-75
SM 321; DI 16 x 24 VDC, 3-32
SM 322; DO 8 x 24 VDC/0.5 A, 3-80
SM 338; POS-INPUT, 5-20
IP 20, 1-12
Isolated measuring sensors, 4-46
connecting, 4-46
L
Lack of encoder supply, SM 321; DI 16 x 24
VDC, 3-31
Limit value, analog input module, 4-40
Linearity error, Glossary-5
Load connection, to analog output module,
4-66
Load connection to current output, to analog
output module, 4-70
Load connection to voltage output, to analog
output module, 4-67
Load voltage missing
analog input module, 4-73
analog output module, 4-74
Logic block, Glossary-5
LWH, Glossary-4
M
M short-circuit, analog output module, 4-74
Measurement
analog input module, 4-41
analog input/output module, 4-44
Measuring method
analog input channels, 4-28
analog input module, 4-41, A-9
analog input/output module, 4-44
SM 331; AI 8 x 13 bits, A-28
SM 331; AI 8 x RTD, A-16
SM 331; AI 8 x TC, A-25
Measuring range
analog input module, 4-41, A-9
analog input/output module, 4-44
SM 331; AI 8 x 13 bits, A-28
SM 331; AI 8 x RTD, A-16
SM 331; AI 8 x TC, A-25
Measuring range module, 4-28
replugging, 4-29
Measuring ranges, analog input channels, 4-28
Measuring sensors, isolated, 4-46
Module Classes, ID, B-2
Module fault, SM 338; POS-INPUT, 5-19
Module filtering mode, Glossary-6
analog input module, 4-41
Module not parameterized, SM 321;
DI 16 x DC 24 V , 3-31
Module overview, 4-3
digital modules, 3-4
SIMATIC TOP connect/...TPA, 8-2
special signal modules, 5-2
Modules, shipping and storage conditions, 1-8
Monoflop time, Glossary-6
SM 338; POS-INPUT, 5-14
MPI, Glossary-6
N
No external auxiliary voltage, SM 322;
DO 8 x 24 VDC/0.5 A, 3-79
No internal auxiliary voltage, SM 322;
DO 8 x 24 VDC/0.5 A, 3-79
No load voltage L+, SM 322; DO 8 x 24
VDC/0.5 A, 3-76, 3-79
Non-isolated, Glossary-6
Non-isolated sensors, 4-48
connecting, 4-48
Normalization, SM 338; POS-INPUT, 5-11,
5-14