Siemens SIMATIC S7-300 Module data Reference Manual

General Technical Specifications
1-14
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
1.7 SIPLUS S7-300 modules
Definition
SIPLUS S7-300 modules are modules that can be used under extended
environmental conditions. Extended environmental conditions mean:
• operation possible at temperatures from –25°C to +60°C
• occasional, brief condensation permitted
• increased mechanical stress permissible
Comparison with “standard” modules
The functional scope and technical specifications for the SIPLUS S7-300 modules
are the same as those of the “standard” modules.
The mechanical and climatic environmental conditions as well as their test method
have changed.
The SIPLUS S7-300 modules have their own order numbers (see table 1-10)
Project engineering in STEP 7
The SIPLUS S7-300 modules are not included in the hardware catalog. Please
design your installation with the corresponding “standard” modules according to the
table 1-10.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)