Siemens SIMATIC S7-300 Module data Reference Manual

A-1
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
Parameter Sets for Signal Modules
In this chapter
Section Contents Page
A.1 How to Assign the Parameters for Signal Modules in the User
Program
A-1
A.2 Parameters of the Digital Input Modules A-3
A.3 Parameters of the Digital Output Modules A-5
A.4 Parameters of the Analog Input Modules A-7
A.5 Parameters of the SM 331; AI 8 x RTD A-11
A.6 Parameters of the SM 331; AI 8 x TC A-19
A.7 Parameters of the SM 331; AI 8 x 13 bits A-27
A.8 Parameters of the SM 331; AI 8 x 16 bits A-30
A.9 Parameters of the Analog Output Modules A-36
A.10 Parameters of the SM 332; AO 8 x 12 bits A-39
A.11 Parameters of the Analog Input/Output Modules A-41
A.1 How to Assign the Parameters for Signal Modules in the
User Program
Parameter assignment in the user program
You have already assigned parameters to the modules in STEP 7.
In the user program, you can use a SFC:
• To reassign parameters to the module and
• To transfer the parameters from the CPU to the addressed signal module
A

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)