Siemens SIMATIC S7-300 Module data Reference Manual

Analog Modules
4-169
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
4.27 Analog output module SM 332; AO 4 x 16 bit;
synchronous; (6ES7332-7ND01-0AB0)
Order number
6ES7332-7ND01-0AB0
Characteristics
The analog output module SM 332; AO 4 x 6 bits has the following characteristic
features:
• 4 outputs in 4 channel groups
• The individual output channels can be programmed as
– Voltage outputs
– Current outputs
• Resolution of 16 bits
• Supports clocked operation
• Supports the “parameter changing during the RUN” function
• Programmable diagnostics
• Programmable diagnostic interrupt
• Programmable substitute value output
• Galvanic isolation between:
– Backplane bus interface and analog output channel
– The different analog output channels
– Analog output and L+, M
– Backplane bus interface and L+, M

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)