Index
Index-8
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
SFC 56 WR_DPARM, A-2
SFC 57 PARM_MOD, A-2
SFC 59, 3-32, 3-80, 4-75
Shield connecting element, dimension drawing,
C-16
Shipbuilding, Approval, 1-4
Short-circuit to L+, SM 322; DO 8 x 24
VDC/0.5 A, 3-76, 3-79
Short-circuit to M, SM 322; DO 8 x 24 VDC/0.5
A, 3-76, 3-79
Sign, analog value, 4-9
Signal module, Glossary-8
dimension drawing, C-15
SIMATIC TOP connect
components, 8-12
connection for 2A modules, 8-18
dimension drawing, C-17
one-conductor connection, 8-14
selecting components, 8-13
three-conductor connection, 8-16
wiring 32-channel digital modules, 8-8
SIMATIC TOP connect TPA
component selection, 8-20
connection example, 8-24
multiplier terminal, 8-21
shield connection, 8-23
terminal allocation to analog module, 8-22
terminal assignment, 8-21
SIMATIC TOP connect/...TPA
advantages of using, 8-3
components, 8-3
Configuration, 8-2
connecting cable, 8-4
connectors, 8-4
mounting terminal block and connecting
cable, 8-10
screw-type terminals, 8-10
spring-loaded terminals, 8-10
wiring, 8-4
wiring actuators/sensors to terminal block,
8-10
wiring rules, 8-7
wiring the front connector module, 8-6
wiring with modules..., 8-3
Simulator module, SM 374; IN/OUT 16, 5-3
Sinusoidal interference, 1-7
SIPLUS S7-300-modules, 1-14
SM 321; DI 16 x 24 VDC
channel-specific diagnostic data, B-5
diagnostic interrupt, 3-32
diagnostics, 3-27
EPROM error, 3-31
external auxiliary voltage missing, 3-31
fuse blown, 3-31
input delay, 3-27
internal auxiliary voltage missing, 3-31
interrupts, 3-32
lack of encoder supply, 3-31
redundant encoder supply, 3-24
voltage type, 3-27
watchdog, 3-31
SM 321; DI 16 x 24 VDC
causes of error and remedial measures,
3-31
diagnostic interrupt, 3-27
hardware interrupt, 3-27, 3-32
hardware interrupt lost, 3-31, 3-33
interrupt-triggering channels, 3-33
parameters, wrong, 3-31
RAM error, 3-31
SM 321; DI 16 x DC 24 V
Resistive circuit of the encoder, 3-24
Synchronous operation, 3-26
SM 321; DI 16 x DC 24 V , Module not
parameterized, 3-31
SM 322; DO 8 x 24 VDC/0.5 A
apply substitute value ”1”, 3-76
causes of error and remedial action, 3-79
channel-specific diagnostic data, B-5
diagnostic interrupt, 3-76, 3-80
diagnostic messages, 3-78
EPROM error, 3-79
fuse blown, 3-79
hold last value, 3-76
interrupts, 3-80
no external auxiliary voltage, 3-79
no internal auxiliary voltage, 3-79
no load voltage L+, 3-76, 3-79
parameters, 3-76
RAM error, 3-79
short-circuit to L+, 3-76, 3-79
short-circuit to M, 3-76, 3-79
substitute value application, 3-76
watchdog, 3-79
wire-break, 3-76, 3-79
SM 327; DI 8/DX 8 x DC 24 V/0.5 A,
parameterizable, Parameters, 3-119
SM 331; AI 8 x 13 bit, Parasitic frequency
suppression, A-29
SM 331; AI 8 x 13 bits
Interference frequency suppression, A-28
Measuring methods and measuring ranges,
A-28
structure of data record 1, A-27
SM 331; AI 8 x 14 bits High Speed,
Synchronous operation, 4-101
SM 331; AI 8 x RTD
interference frequency suppression, A-16
operating modes, A-16
parameters, A-11
To Next Page
Loading...
