Siemens SIMATIC S7-300 Module data Reference Manual

General Technical Specifications
1-16
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
1.8 Mechanical and Climatic Ambient Conditions for the Operation
of SIPLUS S7-300 Modules
Ambient mechanical conditions
Operating category: according to IEC 721 3-3, Class 3M4.
Ambient mechanical conditions test
The following table contains important information on the type and scope of tests
for ambient mechanical conditions of SIPLUS S7-300 modules.
Table 1-11 SIPLUS S7-300 Modules Ambient Mechanical Conditions Test
Test ...
Test Standard Remarks
Vibrations Vibration test according to
IEC 6008 Part 2-6 (sinusoidal)
Type of oscillation: frequency sweeps with a rate of
change of
1 octave/minute.
5 Hz f  9 Hz, constant amplitude of 3.5 mm
9 Hz f  150 Hz, constant acceleration of 1 g
oscillation period: 10 frequency sweeps per axis in
each of three axes perpendicular to each other
Shock Shock test according to IEC 6008
Part 2-27
Type of shock: half-sine
severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks each in the +/–
direction in each of three axes perpendicular to
each other

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)