Siemens SIMATIC S7-300 Module data Reference Manual

General Technical Specifications
1-8
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
1.3 Shipping and Storage Conditions for Modules and Backup
Batteries
Shipping and storage of modules
S7-300 modules surpass the requirements of IEC 61131-2, in respect of shipping
and storage requirements. The following details apply to modules shipped and/or
stored in their original packing.
Climatic conditions correspond to IEC 60721-3-3, Class 3K7 for storage and IEC
60721-3-2, Class 2K4 for transportation.
Mechanical conditions correspond to IEC 60721-3-2, Class 2M2.
Table 1-4 Shipping and Storage Conditions for Modules
Condition
Permitted range
Free fall (in shipping packing) v 1m
Temperature from – 40 C to + 70C
Atmospheric pressure 1080 to 660 hPa (corresponding to an
altitude of –1000 to 3500 m)
Relative humidity 10 to 95 %, no condensation
Sinusoidal oscillations
to IEC 60068-2-6
5 – 9 Hz: 3.5 mm
9 – 150 Hz: 9.8 m/s
2
Shock according to IEC 60068-2-29 250 m/s
2
, 6 ms, 1000 shocks
Transporting backup batteries
Wherever possible, transport backup batteries in their original packing. Special
approval does not have to be obtained for transporting backup batteries for S7-300
systems. The lithium content of the backup battery is approximately 0.25 g.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)