Siemens SIMATIC S7-300 Module data - Page 562

Index
Index-4
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
SM 323; DI 16/DO 16 x 24 VDC/0.5 A,
3-110
SM 327; DI 8/DX 8 x DC 24 V/0.5 A,
parameterizable, 3-116
Structure of data record 1, 3-120
Digital module
assigning parameters, 3-11
diagnostics, 3-12
dimension drawing, C-15
group error LED, 3-13
sequence of steps for commissioning, 3-10
SF LED, 3-13
Digital Output Module
SM 322; DO 32 x VAC 120/230/1 A , 3-49
SM 322; DO 8 x DC 24 V/0.5 A with
diagnostic interrupt, 3-72
Digital output module
parameters, A-5
SM 322; DO 16 x 24 VDC/0.5 A High
Speed, 3-56
SM 322; DO 32 x 120/230 VAC/2 A ISOL ,
3-87
SM 322; DO 32 x 24 VDC/0.5 A, 3-46
structure of data record 1, A-6
Digital Output Module
SM 322; DO 16 x 24/48 VUC, 3-59
SM 322; DO 16 x DC 24 V/0.5 A, 3-53
SM 322; DO 16 x VAC 120/230/1 A, 3-66
SM 322; DO 8 x VAC 120/230/2 A , 3-84
SM 322; DO 8 x VDC 48–125/1,5 A , 3-81
Digital output module , SM 322;
DO 8 x 24 VDC/2 A, 3-69
Dimension drawing, active bus module, C-8
Dimension drawings, C-1
analog module, C-15
digital module, C-15
IM 361, C-13
interface module, C-13
power supply module PS 307, C-8
PS 307, C-8
rail, C-2
RS 485 repeater, C-18
shield connecting element, C-16
signal module, C-15
SIMATIC TOP connect, C-17
Direct access, Glossary-3
Dummy module , DM 370, 5-5
E
Electromagnetic compatibility, 1-6
Encoder absolute, Glossary-3
encoder error, SM 338; POS-INPUT, 5-19
Environmental conditions, 1-9
extended, 1-14
EPROM error
SM 321; DI 16 x 24 VDC, 3-31
SM 322; DO 8 x 24 VDC/0.5 A, 3-79
Equipotential bonding, Glossary-4
Error, of an analog module, 4-34
Extended environmental conditions, 1-14
External auxiliary voltage missing, SM 321;
DI 16 x 24 VDC, 3-31
F
FM, Approval, 1-4
Four-conductor connection, 4-54, Glossary-10
Four-wire transmitter, Glossary-10
Four-wire transmitters, 4-52
FREEZE, Glossary-4
Freeze-function, SM 338; POS-INPUT, 5-12,
5-14
Fuse blown
SM 321; DI 16 x 24 VDC, 3-31
SM 322; DO 8 x 24 VDC/0.5 A, 3-79
G
Ground, Glossary-4
Grounded operation, RS 485 repeater, 7-4
Group diagnostics
analog input module, 4-40
analog output module, 4-43
Group error LED
analog module, 4-72
digital module, 3-13
Group fault-LED, SM 338; POS-INPUT, 5-17
H
Hardware interrupt, Glossary-4
End of scan cycle, 4-76
SM 321; DI 16 x 24 VDC, 3-27, 3-32
when limit exceeded, 4-75
Hardware interrupt lost, SM 321; DI 16 x 24
DI 16 x 24 VDC, 3-31, 3-33
Hold last value, SM 322; DO 8 x 24 VDC/0.5
A, 3-76
I
Identifiers for Australia, 1-4
IEC 61131, 1-4
IM 360
dimension drawing, C-13
interface module, 6-3
IM 361, interface module, 6-5