Siemens SIMATIC S7-300 Module data Reference Manual

A-10
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
Table A-6 Codes for the Measuring Ranges of the Analog Input Modules
Measuring
Method
CodeMeasuring RangeCode
Four-wire
transmitter
2#0010 " 3.2 mA
" 10 mA
0 to 20 mA
4 to 20 mA
" 20 mA
" 5 mA
2#0000
2#0001
2#0010
2#0011
2#0100
2#0101
Two-wire
transmitter
2#0011 4 to 20 mA 2#0011
Resistance,
four-conductor
connection
2#0100 150 
300 
600 
10 k
2#0010
2#0100
2#0110
2#1001
Resistor
four-conductor
connection; 100 
compensation
2#0110 52 to 148 
250 
400 
700 
2#0001
2#0011
2#0101
2#0111
Thermal
resistance + lineari
zation
four-conductor
connection
2#1000 Pt 100 climate
Ni 100 climate
Pt 100 standard range
Pt 200 standard range
Pt 500 standard range
Pt 1000 standard range
Ni 1000 standard range
Pt 200 climate
Pt 500 climate
Pt 1000 climate
Ni 1000 climate
Ni 100 standard range
2#0000
2#0001
2#0010
2#0011
2#0100
2#0101
2#0110
2#0111
2#1000
2#1001
2#1001
2#1011
Thermocouples
internal
comparison
2#1010 Type B [PtRh – PtRh]
Type N [NiCrSi – NiSi]
Type E [NiCr – CuNi]
Type R [PtRh –Pt]
2#0000
2#0001
2#0010
2#0011
Thermocouples
external
comparison
2#1011
Type E [NiCr – CuNi]
Type R [PtRh –Pt]
Type S [PtRh –Pt]
Type J [Fe – CuNi IEC]
Type L [Fe – CuNi]
2#0010
2#0011
2#0100
2#0101
2#0110
Thermocouples
+ linearization
internal
comparison
2#1101
Type L [Fe – CuNi]
Type T [Cu – CuNi]
Type K [NiCr – Ni]
Type U [Cu –Cu Ni]
2#0110
2#0111
2#1000
2#1001
Thermocouples
+ linearization
external
comparison
2#1110

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)