Siemens SIMATIC S7-300 Module data Reference Manual

Preface
vi
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
ET 200M
Distributed Peripheral manual
• Manual Description of configuration, assembly,
wiring.
Signal modules for process automation reference
manual
• Reference Manual
Description of use in process automation,
parameterization with SIMATIC PDM, digital
input modules, digital output modules.
Module data reference manual
You are reading this manual
• Reference Manual→
Descriptions of functions and technical
specifications of signal modules, power
supply modules and interface
modules.
Navigation
To help you find special information quickly, the manual contains the following
access aids:
• At the start of the manual you will find a complete table of contents and a list of
the diagrams and tables that appear in the manual.
• An overview of the contents of each section is provided in the left column on
each page of each chapter.
• You will find a glossary in the appendix at the end of the manual. The glossary
contains definitions of the main technical terms used in the manual.
• At the end of the manual you will find a comprehensive index which gives you
fast access to the information you need.
Recycling and disposal
Because of its low-emission equipment, it is possible to recycle the S7-300. For
ecologically harmless recycling and disposal of your old device, contact a
certificated disposal service for electronic scrap.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)