Simrad EK80 - Page 184

182
394149/C
gClickOKtosavethechosenparametersandclosetheDepthOutputConguration
dialogbox.
6OntheleftsideoftheOutputsdialogbox,selectI/OSetup.
ObservethattheI/OSetuppageisshown.
7OntheI/OSetuppage,clickonceonthechosencommunicationporttoselectit.
8Ifyouareusingaserialport,denetherelevantcommunicationparameters.
aClickSetuptoopentheSerialPortSetupdialogbox.
bIntheSerialPortSetupdialogbox,denetherelevantparametersforthe
communication.
ThecommunicationparametersdenedforNMEA0183are:
•Baudrate:4800bitspersecond
•Databits:8
•Parity:None
•Stopbits:One
Someinstrumentsmayofferotherparametersand/orchoices.Youmustalways
checktherelevantdocumentationprovidedbythemanufacturer.
cClickOKtosavethechosenparametersandclosetheSerialPortSetupdialogbox.
9IfyouareusinganEthernetcommunicationport(LAN),denetherelevant
communicationparameters.
aClickSetuptoopentheLANPortSetupdialogbox.
bIntheLANPortSetupdialogbox,denetherelevantparametersforthe
communication.
Theparametersmustbesetuptomatchyournetworkenvironment.
•LocalIPAddress:ThisistheInternetProtocol(IP)addressofthelocalEthernet
interfaceadapter(circuitboard)inyourProcessorUnit.Ifyouhaveonlyone
Ethernetadapter,youmustusethedefaultvalueprovided.Ifyouhavemore
thanoneEthernetadapteronyourcomputer,orifyouuseanadapterwith
multipleIPaddresses,youmustspecifytheIPaddressoftheadapteryou
wishtouse.
•LocalPort:Thisportmustmatchtheportnumberontheremotecomputer.To
ndtheportnumberontheremotecomputer,consultthedocumentationforthe
softwareutilitytobeused.Ifthedatacommunicationissetuptoonlytransmit
information,thisparameterisnotrequired.
•RemoteIPAddress:ThisistheInternetProtocol(IP)addressfortheremote
computer.Sinceyouareabouttoreceivedata,thisaddressisunessential.
SimradEK80