The Reference Priority screen is divided into 3 areas:
a.
The Actions panel, which provides a single action:
Restore Factory Defaults
b.
The Configure Reference Priorities panel, which displays the priority of NetClock’s
references in a table form.
In this panel you can:
Add and configure new references
Delete references
Enable/disable references
Reorder the priority of NetClock’s references
c.
The Reference Status panel
The Reference Status panel provides a real time indicator of the status of the
NetClock’s references. It is the same as the Reference Status panel on the
HOME screen of the Web UI.
Adding an Entry to the Reference Status Table
To add a new entry to the Reference Status table:
1.
Navigate to the Configure Reference Priorities screen via MANAGEMENT > OTHER:
Reference Priority.
2.
Click the PLUS icon in the top right-hand corner of the Configure Reference Priorities
table.
3.
The Add Reference window will display:
164
CHAPTER 3 • NetClock User Reference Guide Rev. 16
3.3 Managing Input References
To Next Page
Loading...
