Spectracom NetClock 9489 - Page 7

2.9 Connecting Inputs and Outputs
41
2.10 Powering Up the Unit
41
2.11 Setting up an IP Address
42
2.11.1 Dynamic vs. Static IP Address
43
2.11.2 Assigning a Static IP Address
44
2.11.2.1 Assigning a New Static IP Address
44
2.11.2.2 Setting Up an IP Address via the Front Panel
47
2.11.2.3 Setting Up a Static IP Address via a DHCP Network
49
2.11.2.4 Setting Up an IP Address via the Serial Port
50
2.11.2.5 Setting up a Static IP Address via Ethernet Cable
51
2.11.3 Setting Up a Temporary IP Address Remotely
51
2.11.4 Subnet Mask Values
53
2.12 Accessing the WebUI
53
2.13 Connecting Reference Inputs and Network Interface
55
2.14 Configuring Network Settings
56
2.14.1 General Network Settings
58
2.14.2 Network Ports
59
2.14.3 Network Services
62
2.14.4 Static Routes
64
2.14.5 Access Rules
66
2.14.6 HTTPS
67
2.14.6.1 Accessing the HTTPS Setup Window
67
2.14.6.2 About HTTPS
68
2.14.6.3 Supported Certificate Formats
69
2.14.6.4 Creating an HTTPS Certificate Request
69
2.14.6.5 Requesting an HTTPS Certificate
73
2.14.6.6 Uploading an X.509 PEM Certificate Text
75
2.14.6.7 Uploading an HTTPS Certificate File
76
2.14.7 SSH
77
2.14.8 SNMP
84
2.14.8.1 SNMP V1/V2c
88
2.14.8.2 SNMP V3
89
2.14.8.3 SNMP Traps
91
2.14.9 System Time Message
93
2.14.9.1 System Time Message Format
94
2.15 Configuring NTP
95
NetClock User Reference Guide • TABLE OF CONTENTS
V