Suzuki SFV650 - Page 258

1D-69 Engine Mechanical:
• Apply grease to the lip of oil seal.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Apply grease to new O-rings.
CAUTION
!
Use the new O-rings to prevent oil leakage.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Install the oil gallery jets (5) (for cylinder) to the left
and right crankcase halves.
• Apply grease to new O-rings.
CAUTION
!
Use the new O-rings to prevent oil leakage.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Install the piston cooling oil jets (6) to the left and right
crankcase halves.
• Apply a small quantity of thread lock to the bolts (7)
and tighten them to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Piston cooling oil jet bolt (c): 10 N·m (1.0 kgf-m,
7.0 lbf-ft)
Transmission / Gearshift
Install the transmission component. Refer to
“Transmission Removal and Installation in Section 5B
(Page 5B-3)”.
Crankshaft
• Coat lightly molybdenum oil solution to the crankshaft
journal bearings.
M/O: Molybdenum oil (MOLYBDENUM OIL
SOLUTION)
(A)
4
I944H1140062-01
5
I944H1140063-02
6
I944H1140064-02
(c)
7
I944H1140065-02
I944H1140066-01