1D-73 Engine Mechanical:
Front Cam Chain
• Install the front cam chain (1).
• Install the cam chain tensioner (2), washer (3) and
cam chain tensioner bolt (4).
• Tighten the cam chain tensioner bolt (4) to the
specified torque.
Tightening torque
Cam chain tensioner bolt (a): 10 N·m (1.0 kgf-m,
7.0 lbf-ft)
Starter Driven Gear
• Apply engine oil to the bushing of the starter driven
gear.
Generator Rotor
• Install the generator rotor (1). Refer to “Generator
Removal and Installation in Section 1J (Page 1J-4)”.
Rear Cam Chain
• Install the cam chain drive sprocket (1).
NOTE
Align the punched mark “A” on the cam
chain drive sprocket with the punched mark
“B” on the crankshaft.
• Install the rear cam chain (2).
• Install the cam chain tensioner (3), washer (4) and
cam chain tensioner bolt (5).
1
I944H1140082-01
2
(a)
4
(a)
4
3
2
I944H1140083-01
I944H1140084-02
1
I944H1140085-01
“A”
“B”
1
I944H1140086-02
2
I944H1140087-01
To Next Page
Loading...
