• Keeping pressed the <ENTER> and ▲ keys switch on the instrument - the following message should
appear on the unit's screen: BOOTSTRAP v1.06 (or higher).
• Wait for the message <USB> on the unit’s screen and start from the PC: go-usb.bat.
• The changing number and final message: "..... o.k." should appear on the computer screen.
• Successful firmware update will be indicated by the message: Program loaded!
• Switch off the instrument.
Note: With the use of the SvanPC++ software it is very easy to check if there are any new firmware
releases available for download.
16.6 PRESERVATION OF INTERNAL BATTERIES
• To preserve the life of the internal batteries, it is recommended that the instrument is turned off when it
is stored.
• When the instrument is turned off, it still draws a small amount of battery power. Therefore, it is
recommended to extract them out of the instrument if the storage time is long.
16.7 TRANSPORTATION AND STORAGE
For transportation or storage purpose, we recommend using the packaging provided by the manufacturer. In a
potentially dirty industrial environment it is advisable to use the carrying case provided by the manufacturer
such as the fabric material case (SA 47), lightweight case (SA 143) or waterproof case (SA 79), which ensures
excellent mechanical and environmental protection and long-term storage conditions.
Clean the surface of the instrument with damp soft cloth.
The instrument sockets should be cleaned with the use of compressed air.
Note: In cases of larger dirt, such as oil or grease, contact your Local Authorized Distributor or
Svantek Service Office.
• In case your instrument does not respond proceed with hardware reset of the instrument (see
Chapter 16.4).
• In case the reset does not help call your Local Authorized Distributor or Svantek Service Office.
Should your SVANTEK professional measurement equipment need to be returned for repair or for calibration,
please contact the service office at the following number or contact via the SVANTEK website.
Service Office: +48 (22) 51-88-320 or +48 (22) 51-88-322.
Office hours are 9:00 a.m. to 5:00 p.m. Central European Time.
E-mail: office@svantek.com.pl
support@svantek.com.pl
Internet: www.svantek.com
Address: SVANTEK Sp. z o.o.
Strzygłowska 81
04-872 Warszawa,
Poland
To Next Page
Loading...
