Svantek SVAN 979 - Advanced Alarm Function - Alarms

61
SVAN 979 User Manual
It is recommended to set the Start Delay time to 0 seconds for the Timer
function.
4.12 ADVANCED ALARM FUNCTION – ALARMS
The Alarms position appears in the
Measurement list if the advanced alarms
configuration file (ALARM.SVA) is uploaded to
the predefined SYSTEM catalogue. This
position opens the screen in which you can
enable or disable the advanced alarm
function.
<ENT>
Note: The advanced alarm settings are configured via SvanPC++ or via SvanNET web-service
since this function was designed for the SV 279 PRO/PRIM monitoring stations.
If you enable advances alarms, the „alarm”
icon appears, and the instrument will generate
alarms according to the programmed settings.
The SvanPC++ and SvanNET manuals
describe the advanced alarms configuration.
►
Enabled Alarms settings can be seen in the
special measurement views: Alarm Actions,
Alarm Events and Alarm Conditions.
These views can be changed with the ▲ / ▼
key pressed together with <Alt>.
The event, action and condition record can be
changed with the ◄ / ► key pressed together
with <Alt>.
<Alt/▼>