8 AUXILIARY SETTINGS – Auxiliary Setup
The Auxiliary Setup section provides
additional functions that allow, for instance,
customization of the device interface to a
specific user requirement and are not
directly related to the hardware components
of the instrument.
The Auxiliary Setup section contains following positions:
Language allowing you to select the language of the user interface.
Factory Settings allowing you to return to the default, factory settings.
Reference Levels allowing you to select reference levels for Vibration measurements.
RPM Measurement allowing you to unlock the RPM function. After unlocking this position is
automatically transferred to the Measurement section
User Filters allowing you to select and set the correcting values for all real-time and 1/1 -
1/12 octave filters.
Vibration Units allowing you to select units for Vibration results. This position appears only in
Vibration modes.
Warnings allowing you to enable/disable warnings to be displayed during the normal
operation of the instrument.
8.1 SELECTING THE USER INTERFACE LANGUAGE – LANGUAGE
The Language position enables selecting
language of the user interface.
If after turning the instrument on an unknown
language interface appears on the display,
you can reset the instrument with four
<Shift/Enter/Alt/Start> keys pressed
together. After this, the instrument will come
back to the default setup with the English
interface.
8.2 RESTORING THE FACTORY SETTINGS – FACTORY SETTINGS
The Factory Settings position allows you to
restore the default settings of the instrument.
Being on the Factory Settings position
press <ENTER>, select Yes in the opened
Factory Settings screen and press
<ENTER> to perform the operation. After the
restoration process the instrument will
inform that “Settings restored”.
The factory settings can be installed also with four <Shift/Enter/Alt/Start> keys pressed together.
To Next Page
Loading...
