Svantek SVAN 979 - Display Parameters

166
SVAN 979 User Manual
Action
Type of action in case of alarm: marker, audio, external
I/O, SMS text message, or e-mail.
Chapter
4.12
17.5 DISPLAY PARAMETERS
Name
Description
Screen
Reference
Display
Section of the Main Menu that enables setting of the
measurement views.
Chapter
5
Display Mode
Mode of measurement results presentation/view. Modes
can be activated in the Display Modes screen.
Chapter
5.1
One Result view
Mode of the one result view. This mode is always
available and cannot be disabled in most functions:
Level Meter, 1/1 Octave, 1/3 Octave, 1/6 Octave,
1/12 Octave, FFT and Loudness.
Chapter
5.1.2
Running SPL
view
Mode of the running SLP result view in Sound
measurement modes. This mode is used for the noise
level estimation before the measurement start.
Chapter
5.1.1
1 Prof. & 3 Prof.
view
Mode of presentation of one result in the upper part of
the screen and three results in the lower part of the
screen.
Chapter
5.1.3
1 Prof. & Logger
view
Mode of presentation of one result in the upper part of
the screen and time history (logger) results in the lower
part of the screen.
Chapter
5.1.3
3 Prof. & Logger
view
Mode of presentation of three results in the upper part of
the screen and time history (logger) results in the lower
part of the screen.
Chapter
5.1.3
Logger view
Mode of presentation of time-history (logger) results.
Chapter
5.1.4