Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 226 of 545 2020-04-15
Text mode
+CBM:<sn>,<mid>,<dcs>,<pag>,<pags><CR><LF><data>
<ds>=1:
PDU mode
+CDS: <length><CR><LF><PDU>
TEXT mode
+CDS: <fo>,<mr>,<ra>,<tora>,<scts>,<dt>,<st>
Acknowledge for the received SMS-STATUS-REPORT SM is sent to network immediately
when +CSMS <service> is set to '0' or when +CSMS <service> is set to '1', acknowledge is
sent via +CNMA command during pre-defined timeout, an error is sent to network in case
timeout expire, next +CDS response is depend on acknowledge of current received +CDS
response in case +CSMS <service> parameter set to '1'.
<ds>=2:
+CDSI: <mems>,<index>
Unsolicited fields:
Name
Type
Description
<mems>
string
memory storage where the new message is stored: "SM", "ME".
<index>
integer
location on the memory where SMS is stored.
<alpha>
string
alphanumeric representation of originator/destination number
corresponding to the entry found in MT phonebook; used character set
should be the one selected with command +CSCS.
<lenght>
integer
PDU length
<PDU>
string
PDU message
<oa>
string
originating address, string type converted in the currently selected
character set (see +CSCS)
<alpha>
string
alphanumeric representation of <oa>; used character set should be the
one selected with command +CSCS.
<scts>
string
arrival time of the message to the SC
<tooa>
integer
type of number <oa>:
129 - number in national format
145 - number in international format (contains the "+")
<fo>
string
first octet of message PDU, see 3GPP TS 03.40/23.040
<pid>
string
Protocol Identifier
<dcs>
string
Data Coding Scheme

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English