Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 233 of 545 2020-04-15
Name
Type
Default
Description
<index>
integer
-
message position in the storage list.
<stat>
integer
-
message status. See the above <stat> parameter
description.
<alpha>
string
-
String type alphanumeric representation of <da> or
<oa>, corresponding to an entry found in the
phonebook; used character set is the one selected with
command +CSCS.
<length>
integer
-
PDU length in bytes
<pdu>
string
-
message in PDU format, according to 3GPP TS
23.040
When message format is TEXT mode, the <stat> parameter is:
Name
Type
Default
Description
<stat>
string
N/A
status value
Values:
"REC
UNREAD"
:
new message
"REC READ"
:
read message
"STO UNSENT"
:
stored message not sent yet
"STO SENT"
:
stored message already sent
"ALL"
:
all messages
In case of TEXT mode, the representation format for stored messages (either sent or
unsent) or received messages (either read or unread, not message delivery confirm) is:
+CMGL: <index>,<stat>,<oa/da>,<alpha>,<scts>[,<tooa/toda>,<length>]<CR><LF>
<data>[<CR><LF>
+CMGL: <index>,<stat>,<oa/da>,<alpha>,<scts>[,<tooa/toda>,<length>]<CR><LF>
<data>[...]]
The information written in italics will be present depending on +CSDH last setting.
Name
Type
Default
Description
<index>
integer
-
message position in the storage list.
<stat>
string
-
message status. See the above <stat> parameter
description.
<oa/da>
string
-
originator/destination address, represented in the
currently selected character set (see +CSCS).
<alpha>
string
-
The alphanumeric representation of <da> or <oa>,
corresponding to an entry found in the phonebook;
used character set is the one selected with
command +CSCS.
<scts>
string
-
TP-Service Centre Time Stamp in Time String
Format.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English