Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 234 of 545 2020-04-15
<tooa/toda>
integer
N/A
type of number <oa/da>
Values:
129
:
number in national format
145
:
number in international format (contains the "+")
<length>
integer
-
text length
<data>
string
-
TP-User-Data
If <dcs> indicates that 3GPP TS 23.038 default
alphabet is used, each character of GSM alphabet
will be converted into current TE character set (see
+CSCS)
If <dcs> indicates that 8-bit or UCS2 data coding
scheme is used, each 8-bit octet will be converted
into two IRA character long hexadecimal number
(e.g. octet 0x2A will be converted as two characters
0x32 0x41)
If <fo> indicates that a UDH is present each 8-bit
octet will be converted into two IRA character long
hexadecimal number. The <length> indicates text
length in characters without UDH length.
In case of TEXT mode, the representation format for delivery confirm messages is:
+CMGL: <index>,<stat>,<fo>,<mr>,<ra>,<tora>,<scts>,<dt>,<st>[<CR><LF>
+CMGL: <index>,<stat>,<fo>,<mr>,<ra>,<tora>,<scts>,<dt>,<st>[...]]
Name
Type
Default
Description
<index>
integer
-
message position in the storage list.
<stat>
string
-
Message status. See the last <stat>
parameter description.
<fo>
integer
-
first octet of the message PDU
<mr>
integer
-
message reference number; 3GPP TS 23.040 TP-
Message-Reference in integer format
<ra>
string
-
recipient address, represented in the currently selected
character set (see +CSCS)
<tora>
string
-
type of number <ra>
<scts>
string
-
arrival time of the message to the SC
<dt>
string
-
sending time of the message
<st>
integer
-
message status as coded in the PDU
If parameter is omitted the command returns the list of SMS with "REC UNREAD" status.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English