MULTI PHASE
12 NAVIGATION management & monitoring
To delete stored waypoints individually:
Insert CLR at IDENT of the intended
waypoint to be cleared [1L].
In the example TOU1 is cleared; as i
was the unique stored waypoint
stored, page reverts to NEW
WAYPOINT page.
t
vailable If other waypoints would be a
page reverts to the next stored
waypoint in the list.
Same logic as above applies for
display of scratchpad messages if
attempted deletion of WPT, which is
part of a F-PLN or stored route.
Automatic deletion:
Stored waypoints are automatically
deleted when FMGC switches to
DONE phase if CO RTE retention is
selected NO in AMI file.
Otherwise they are retained.
STORED WAYPOINT 1/1
IDENT
TOU1
LAT/LONG
4430.8N/00115.6E
PLACE /BRG /DIST
TOU /000° / 20.0
NEW
WAYPOINT>
DELETE ALL}
CLR
NEW WAYPOINT
IDENT
_______
LAT/LONG
____.__/_____.__
PLACE /BRG /DIST
_______/___° /___._
PLACE-BRG /PLACE-BRG
_____-___° /_____-___°
RETURN>
J43126AA 00
© THALES AVIONICS S.A.
AIRBUS A318/319/320/321
To Next Page
Loading...