FMS DEGRADED OPERATION
FMGC RESETS or FAILURES
11
Triple reset of one FMGC (Cont'd)
EFIS PANEL ...........................
............ Mode/Range re-select
Temporarily SELECT a different mode or
range on the corresponding EFIS control
panel, in order to recover ND display and
delete MAP NOT AVAIL and/or SET OFFSIDE RNG/MODE messages.
The operation in SINGLE mode is described in Ch. 2.7.
Caution
Manual reset may be attempted by resetting the associated C/B.
In this case, apply the following procedure:
− Pull C/B for 5 seconds,
− Wait 1 minute,
− Pull again C/B for 5 seconds.
Or
− Pull C/B for 12 minutes.
On the opposite side:
No action is required
AIRBUS A318/319/320/321
© THALES AVIONICS S.A.
J43126AA 00