APPENDICES
18 MCDU NAMING and DATA FORMAT
Access
to
MCDU
Display
naming
Path /
Terminator
DEFINITION
LAT REV
VERT REV
CXXX°
HHHHH
(3)
CA XXX is the course.
HHHHH terminating
altitude.
Y Y
CA
8000 FT
CXXX°
NAV/DD
CD XXX is the course.
NAV is the first three
characters of the DME
station identifier from which
the course is defined.
DD is DME distance.
Y Y
DME
DD
CD
CXXX°
INTCPT
CI XXX is course. The
following leg defines the
intercept termination.
Y
(5)
Y
CXXX°
WPTRRR
CR XXX is course.
WPT is the first three
characters of the identifier
of the fixed waypoint from
which the course is defined.
RRR is radial from WPT.
Y Y
CI
Notes:
(1) Signifies that pilot may insert this leg in F-PLN. All other legs can
only be entered from the Navigation Data Base.
(2) Access from WPT only.
(3) Altitude termination may be displayed as flight-level (FLHHH) or
altitude (HHHHH).
Leading zeros are suppressed when altitudes are displayed.
(4) Access from either left LS key results in a LAT REV at WPT.
(5) Access from left LS key results in a LAT REV at the termination
waypoint of the following leg (AF, CF, FA or FM).
J43126AA 00
© THALES AVIONICS S.A.
AIRBUS A318/319/320/321
To Next Page
Loading...