Thales FMGS - Page 674

APPENDICES
28 MCDU NAMING and DATA FORMAT
DATA NAME FORMAT
RANGE
(X is input)
UNITS
MCDU PAGE
WIND DIR
/MAG
NNN/NNN
Both must be entered
An entry of WIND
DIR = 360 is
displayed as 0.
Leading zeros may be
omitted
WIND DIR:
0 – 360
WIND MAG
(magnitude=
speed):
0 - 250
Degrees
KT
PERF APPR,
CLIMB WIND
CRUISE WIND
DESCENT WIND
WIND DIR
/MAG
/ALT
NNN/NNN/ALT or
Flight Level
An entry of Wind DIR
=360 is displayed
as 0
NNN: Leading zero
may be omitted
ALT
WIND DIR:
0 – 360
WIND MAG
(magnitude=
speed):
0 – 250
Same as ALT
Degrees
/KT
/ft (MSL)
CLIMB WIND,
CRUISE WIND,
DESCENT WIND
ZFW NN.N if Kg unit
NNN.N if lb. Unit
Leading and trailing
zeros may be omitted
35 – Max ZFW if
Kg unit
Thousands
of Kg or lb.
(OPC
option)
INIT B
ZFWCG Same as CG Same as CG
Same as
CG
INIT B
Note (1): An entry with a Back Beam (B) or a Front Beam (F) indicator is
allowed for an ILS course:
- If the "Back Course Take Off" option and if the "Back Beam
Approach" option are activated (OPC file).
- Otherwise, "FORMAT ERROR" s-pad msg is triggered.
Note (2): The SHIFT and TO LIMIT values must be consistent (e.g. the
runway length remaining shall be less than or equal to the
runway length – position shift).
J43126AA 00
© THALES AVIONICS S.A.
AIRBUS A318/319/320/321