Topcon 3D OCT-1 User Manual

144
ANALYZING TOMOGRAMS
Canceling the modification
On the tomogram screen, select "Epithelium" and then "Undo Modify". The modification is canceled
and the status right after "Modify" has been selected is reset.
Finishing the modification
Select "Epithelium" and then "Exit Modify" to finish the modification mode. "M" disappears at the upper
right side of the screen.
In "Pointing Mode", the "+" mark also disappears.
Click "Save" on the tool bar, and the modification is saved.
To change to "Drawing Mode", select it on "Layer Modification" in the "Thickness" tab of "Options".
For other layers, carry out the same operation to modify them.
CAUTION
When you have changed to the original tomogram after changing to two
or more tomograms on the screen, you cannot return the edited layers
to the original status by "Undo Modify". After carrying out "Exit Modify",
the edited layers are decided and cannot be returned to the original sta-
tus. However, in both cases, the data are not saved. If you return to the
patient list screen without saving the data, you can start the operation
from the beginning.

Topcon 3D OCT-1 Specifications

General

Brand	Topcon
Model	3D OCT-1
Category	Medical Equipment
Language	English