How to resolve internal communication error on Topcon 3D OCT-1 Medical Equipment?
If the Topcon Medical Equipment displays 'Internal communication error', it means that an error has occurred in the communication between the built-in PCBs. The suggested solution is to turn the power switch OFF.
What to do if Topcon 3D OCT-1 detects blink during fundus image capture?
If the Topcon Medical Equipment detects a blink while capturing a fundus image, it means a blink was detected during photography. The suggested solution is to capture the image again.
What to do if communication error occurs on Topcon 3D OCT-1?
If the Topcon Medical Equipment shows a communication error, it signifies a problem in the communication between the instrument and the external personal computer. Ensure that the LAN cable is correctly connected to both the instrument and the external personal computer.
How to fix out of memory error on Topcon 3D OCT-1?
If the Topcon Medical Equipment displays 'Out of memory', it indicates that the memory area used by the built-in Operating System is insufficient. The suggested solution is to turn the power switch OFF and try again.
Why can't I use certain letters for the database name in Topcon Medical Equipment?
The Topcon Medical Equipment restricts the use of certain letters for the database name because the letters used for the database are not allowed. Create a new database without the unusable letters, and then register it again.
Why does my Topcon 3D OCT-1 Medical Equipment say the current archive drive is full?
The Topcon Medical Equipment indicates that the current archive drive is full because the set archive drive's capacity is insufficient. To resolve this, set the archive drive to one with sufficient free capacity, and then restart archiving.
How to fix Topcon 3D OCT-1 Medical Equipment patient information registration error ID?
If you encounter a patient information registration error ID with your Topcon Medical Equipment, the registration of a new patient has likely failed. Check if you're attempting to register a patient with an existing ID, using non-numerical characters, inputting correct data into all database items, or if the drive saving photography data has sufficient capacity.
What to do if Topcon Medical Equipment says there is not enough free capacity to save data?
If the Topcon Medical Equipment indicates insufficient free capacity to save data, ensure the drive for photography data has sufficient free space. Then, resume photography.
General| Brand | Topcon |
|---|---|
| Model | 3D OCT-1 |
| Category | Medical Equipment |
| Language | English |
To Next Page