Preface
The purpose of this publication is to provide a trained service technician with the
information for troubleshooting, testing, and repair of the Ventrac 4520 series
machines.
Refer to the Operator’s Manuals for operating, maintenance, and adjustment
instructions. Refer to the Part’s Manual for specific part information. Additional copies
of the Operator’s and Part’s manuals are available at www.Ventrac.com under
resources.
Venture Products Inc.® and Ventrac reserve the right to change the product
specifications or this publication without notice.
DANGER
This symbol indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury. This signal word is limited to the most
extreme cases.
WARNING
This symbol indicates a potentially hazardous situation which, if not avoided
could result in death or serious injury.
CAUTION
This symbol indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury and/or property damage. It may also be
used to alert against unsafe practices.
IMPORTANT
The important notice will give the important instructions which must be
followed to prevent damage to equipment.
Note: A note will give the general information about the correct operation,
maintenance, service, testing, or repair of the machine.
Preface: Page 4 4520P
09.40003Rev 00
To Next Page
Loading...
